DEX.VN là nhà phân phối chính hãng cho các thiết bị chuyên gia biến tần động cơ thiết bị truyền động cơ điện. Chúng tôi chuyên cung cấp các thiết bị Động cơ :Bộ Encoder và Tachco, Armature Discs, Chổi than đế bộ Ghá, Động cơ DC. Giải pháp về tự động trong ngành với chất lượng đặt hàng nhanh từ
3 - 5 ngày
1 - 2 tuần
1. Tên sản phẩm:MP80115DH - 0.55kW (0.75HP) x 2000RPM DC Motor - IP22 - F165 Foot & Flange Mount
Mã sản phẩm:MP80115-F165 (080MP00038)
Mô tả chi tiết:Động cơ DC MP80115DH - 0.55kW (0.75HP) x 2000RPM DC Motor - IP22 - F165 Foot & Flange Mount
Electrodrives - 0.55kW x 2000RPM - DC Permanent Magnet Motor for 180V DC supply.
80 Frame, self ventilated (IC01) to IP22 with F165 Flange and Feet.
Includes shaft mounted cooling fan.
Continuous Output is...
0.55kW x 0/2000RPM for 3.8A x 180V DC
Form Factor is 1.6 at this output.
Use over 20:1 speed turn-down continuous and full torque at zero speed for 10 seconds.
Weight is 19kg (Packed weight is 21kg).
200mm/150mm Wide x 432m Long x 171mm high overall.
Foot mount on 4 x slots for M8 bolts at 125mm wide x 100mm centres, 50mm back from the flange face.
Flange mount on 4 x 10mm holes at 165mm pcd in 200mm diameter flange with 130mm register (F165-1).
Shaft is 19mm dia x 40mm long with 6mm wide key.
Rated at 40C Ambient.
Use the DC Smoothing choke linked below to increase the output, extend the brush life or when the 514C (or other 4Q drive) is fitted.
Part number is - MP80115DH-F165-080MP00038
Place of manufacture is UK
Customs code is 85 01 33 009 000T
Manufacturer is Electrodrives, previously sold under many other names including; GEC Machines, Bull Electric, Brook Crompton, Invensys, Tiger Cub and other badge only names.
2. Tên sản phẩm:Creusen - 2.2kW (3HP) x 3000RPM 180V B5 DC Motor - IP54 - 90L-4GPFTGVK
Mã sản phẩm:90L-4GPFTGVK B5 (A200) 180V DC
Mô tả chi tiết:Động cơ DC Creusen - 2.2kW (3HP) x 3000RPM 180V B5 DC Motor - IP54 - 90L-4GPFTGVK
Creusen - 2.2kW x 3000RPM - Permanant Magnet DC Motor for 180V DC supply from any 2 pulse converter with 20mH Smoothing Choke.
90 Frame, Totally Enclosed Force Cooled to IP54.
Includes Force Cooling Fan and 20V/1000RPM Tacho-generator (AC Rectified).
Use with 512C DC Thyristor Drives (at 16A) or 514C when speed feedback is set for 'Armature Voltage'.
Continuous Output is...
0/2.2kW x 0/3000RPM for 14.3A x 180V DC when fitted with a 20mH DC smoothing choke.
Torque is 7Nm constant to 3000RPM.
Speed range is 50:1 turn-down continuous or full torque at zero speed for 10 seconds.
Weight is 23kg.
222mm Wide x 600mm Long x 182mm high overall.
Flange mount on 4 x 12mm holes equispaced on 165mm PCD with 130mm diameter spigot in the 200mm diameter flange.
Shaft is 24mm dia x 50mm long with 8mm wide key..
Rated at 40C Ambient.
Force cooling fan fitted for 230V single or three phase 400V supply.
Part number is - 90L-4GPFTGVK B5 (A200) 180V DC
Place of manufacture is Holland
Customs code is 85 01 33 009 000T
3. Tên sản phẩm:TT LAK4132B - 22kW (30HP) x 1800RPM DC Motor - IP23 - Foot Mount (B3)
Mã sản phẩm:TT-LAK4132B-EM2269
Mô tả chi tiết:Động cơ DC TT LAK4132B - 22kW (30HP) x 1800RPM DC Motor - IP23 - Foot Mount (B3)
TT Electric - 22kW x 1800RPM - DC Shunt Wound Motor for 460V DC supply from 6 pulse converter.
132 Frame, Force Ventilated (IC06) to IP23.
Includes force cooling fan, 2 x thermistor temperature detection, washable intake filter and 60V/1000RPM Tacho-generator.
Use with 590P DC Thyristor Drives (at 70A) having the tacho feedback board fitted.
Continuous Output is...
0/22kW x 0/1800RPM for 55A x 460V DC.
Torque is 116.7Nm constant to 1800RPM, then can be constant power for a short field control range (request further information if you need this).
Overload is 160% x full load torque up to 1800RPM for maximum 110A x 10 seconds every 5 minutes.
Speed range is 100:1 turn-down continuous or full torque at zero speed for 10 seconds.
Weight is 167kg.
Armature Inertia is 0.12kgm2
Ball bearing included at the drive end for direct coupling.
290mm Wide x 907mm Long x 491mm high overall.
Foot mount on 12mm holes at 216mm wide x 482mm centres, 80mm back from the shaft shoulder.
Shaft is 38mm dia x 80mm long.
Rated at 40C Ambient.
Force ventilation fan fitted at 0.25kW 0.8A flc x 400V 3ph 50Hz.
Part number is - TT-LAK4132B-EM2269
Place of manufacture is France
Customs code is 85 01 33 009 000T
Download the dimension drawing from the link below...
LAK4132B Drawing (144 kB)
Thông tin liên hệ: http://dex.vn/
Miss: Thu huyền
Trụ sở: Số 105 Hoàng Văn Thái, Quận Thanh Xuân Hà Nội
Hotline: 01696907585/04.3566.7851
E-mail: contact@dex.vn