bachhoa24.com
|
ERDCO Flow Meters and Indicators - 3100 |
Khu vực: Tp. Hồ Chí Minh - Ngày đăng: 26/03/2016 11:34 - Đã xem: 298 |
|
|
Mã tin : | 1634841 Nâng cấp tin qua ĐTDĐ |
Liên hệ : Công ty TNHH - TM Song Thành Công, Tên: Nguyễn Yến, Đ/c: 10 lô O KDC Miếu Nổi, Đinh Tiên Hoàng, P.3, Q. Bình Thạnh, Tp. Hồ Chí Minh , Tel: 01656566777 |
|
ERDCO Flow Meters
SERIES
|
PIC
|
DESCRIPTION
|
|
|
|
3500 Armor-Flo™ Flow Meters with Hi/Lo Switches
|
|
In addition to the performance benefits of the 3400 Series flow rate meter, the 3500 Series Armor-Flo™ includes switching capabilities. Adjustable flow switches provide positive indication of flow/no flow conditions or may be positioned to establish process limits. In either application the switch captures the indicator preventing movement until the flow rate is within the acceptable range.
The glass encapsulated reed switches are SPDT rated at 0.25 amperes at 120vac (1.5 amperes at 24vdc). This switch is appropriate for use in Class I, Division 2 areas.
|
3600 Armor-Flo™ Meter with Signal Tranmission
|
|
Here is a combination of signal transmission with independent mechanical local flow rate indication. Should your 24vdc loop go down, you will still be able to take flow rate readings at the meter.
The output signal is linear within the middle 80% of the range and well suited for tracking utility applications. A response curve is furnished with each flow meter. Transmitter signal options include:
4-20 mA two wire loop powered
4-20 mA with concurrent 0-1000Hz frequency output
4-20 mA with two adjustable set points
Applications include valve modulation, remote metering, sub-metering, blending and totalizing. Use with ERDCO accessory displays for remote indication or totalizing.
|
3700 Armor-Flo™ Meter with NEMA 7 Enclosure
|
|
Transmit a signal or actuate limit switches in hazardous areas with the 3700 Series Armor-Flo™ meter. The cover housing is listed by Underwriters Laboratories as an enclosure for metering equipment in hazardous areas. It contains an easy to read calibrated scale and the signal output or switch circuitry. These devices are magnetically coupled with the flow sensor. This results in complete isolation from the fluid stream.
Six signal and switch options are available:
4-20 mA two wire transmitter
4-20 mA transmitter and frequency output
4-20 mA transmitter with 2 adjustable setpoints
Low flow limit switch
High flow limit switch
Low and high flow limit switches
All instruments are calibrated to the liquid or gas flow conditions that you specify. A wide range of connection types, engineering units, signal options and sizes are available.
|
20 Series TURBO-FLO™Probe for Metering |
|
Here is the precision of a turbine meter with insertion meter ease of use. The low mass non-metallic turbine rotates in direct proportion to fluid velocity and can provide local flow rate and total information with no external power required. 4-20 mA signal outputs are also available for control and automation functions.
The Series 20 probe features 304 stainless steel probe and fitting construction with insertion length for 1.5 to 72 inch pipe sizes. This product is typically installed through 1.25/1.5 inch pipe tees, saddles or threaded spuds - all standard pipe fittings. Very popular method of installation is through a 1.5 inch port ball valve which provides for easy installation and removal.
A full compliment of instrumentation for indication of flow rate, totalization and control function is available. Make Turbo-Flo™ your flow measurement solution for water-based liquids.
|
22 series Turbo_Flo™Probe with Hot Tap
|
|
Here is an easy to install insertion meter with turbine meter accuracy. The low mass non-metallic turbine rotates in direct proportion to fluid velocity and can provide local flow rate and total information with no external power required. 4-20 mA signal outputs are also available for control and automation functions.
The 22 Series probe has its own integral screw jack mechanism for "hot tap" insertion through a 1.5 inch full port ball valve at pressures up to 400 psig. By rotating the crank handle at the top of the probe, the turbine is lowered through the open ball valve into the stream. What an improvement over the "tighten down nuts on three threaded rods in rotation" method!
This instrument is ideal for periodic sampling or permanent installation. It is often used as a flow prover for other metering devices in large line sizes.
|
25 Series Turbo-Flo™Probe with 4-20mA Output
|
|
Here is the precision of a turbine meter with insertion meter ease of use. The low mass non-metallic turbine rotates in direct proportion to fluid velocity and can provide local flow rate and total information with no external power required. 4-20 mA signal outputs are also available for control and automation functions.
The 25 Series range offers high performance non-metallic materials of construction like DuPont Delrin® and PVC that are also more economical than stainless steel. Delrin® is a particularly good choice for water applications and due to its high natural lubricity, it resists coating from organics and mineral salts. We recommend PVC construction for use in PVC piping systems.
Probe lengths for use in up to 10 inch diameter pipe sizes are available. A full compliment of instrumentation for indication of flow rate, totalization and control functions are available.
|
HP-302 Open Stream Velocity Meter Hand-Held
|
|
The HP-302 is a hand held turbine meter intended for field use. The turbine, when immersed in a flowing stream, rotates at a speed in direct linear proportion to the fluid velocity. A pulse signal is produced with each rotation of the turbine.
The patented design of the turbine and shroud offer unique capabilities. In combination, turbine and shroud are highly directional, enabling detection of stream patterns as well as measurement of velocity. By adjustment of a pivot, the turbine may be rotated over 90 degrees for a vertical velocity measurement and insertion into pipe discharge ends. Small size permits measurement of streams as shallow as 1.5 inches. In addition to the 3 foot probe, extensions may be used for an overall reach of 21 feet enabling sewer surveys from street level.
|
|
|
|
|
|
Ngày hết hạn: 31/12/2016 11:34 |
|
|
Các tin đăng trước cùng danh mục » » »
|
|
|
Xem từ 31 đến 45 (của 30929 Rao vặt) |
|
|
|
|
Cân điện tử thông dụng VIBRA 1. 5-30KG (207) CÂN ĐIỆN TỬ THÔNG DỤNG VIBRA - JAPAN 1. 5-30KG |
|
Tp. Hồ Chí Minh » Q. 7 25/03/2016 |
|
Địa chỉ bán khí nito tinh khiết tại Bình Dương, bán khí Nito tinh khiết tại Bình (220) Địa chỉ bán khí nito tinh khiết tại Bình Dương, bán khí Nito tinh khiết tại Bình Dương Khí Nito tinh khiết gồm khí ni tơ có độ tinh khiết 99. 999% .. . |
|
Tp. Hồ Chí Minh » Q. 4 25/03/2016 |
|
Ống dẫn dầu, dẫn khí nén (245) Công ty TNHH MTV SX & TM Nhật Minh Hiếu chuyên cung cấp : - Ống nhựa lõi thép dẫn nước/ dầu UNIGAWA - Đường kính (mm): từ 16 - 150 - Quy cách đóng .. . |
|
Tp. Hà Nội » H. Thanh Trì 25/03/2016 |
|
Cân Shinko HT-224CE/ 220g x 0. 1mg (238) Cân phân tích HT-224CE Thương Hiệu: Vibra-Japan Sản Xuất: Nhật HT-224CE Cân điện tử HT-224CE (Chuẩn thường) Thông số kỹ thuật : Tải trọng: 220g x .. . |
|
Tp. Hồ Chí Minh » Q. 7 25/03/2016 |
|
Xe nâng thùng phuy, xe nâng quay thùng phuy giá tốt nhất (247) Chúng tôi chuyên cung cấp xe nâng quay đổ phuy giá rẻ nhất VN. Xe nâng quay đổ phuy nhập khẩu nguyên chiếc từ ĐÀI LOAN, ĐỨC, NHẬT…. – Tải trọng nâng .. . |
10 đ |
Tp. Hồ Chí Minh » Q. 12 25/03/2016 |
|
xe nang tay cao mini 400kg, xe nang tay cao 1000kg, xe nang tay cao 1500kg (183) 0938 164 386-08 3716 3230 ms Quỳnh Chuyên kinh doanh các loại xe nâng chính hãng GIÁ TỐT nhất Việt Nam – giao hàng tận nơi XE NÂNG TAY THẤP THUỶ .. . |
|
Bà Rịa-Vũng Tàu » H. Đất Đỏ 25/03/2016 |
|
Cân Shinko 3 số lẻ 220G 320G/ 0.001 (203) CÂN NGÀNH VÀNG GS-SHINKO Xuất xứ: Nhật Bản Ms. Lan 0908 103 474 Tính năng: Hãng sản xuất: SHINKO-JAPAN Độ chính xác cao , độ phân giải bên trong cao .. . |
|
Tp. Hồ Chí Minh » Q. 7 25/03/2016 |
|
Tủ ấm (300lít) hãng LABTECH - Hàn Quốc giá rẻ (197) + TỦ ẤM ĐIỆN TỬ HIỆN SỐ Model: LIB-300M Hãng sản xuất: Daihan Labtech – Hàn Quốc Mọi chi tiết xin liên hệ: Võ Chí Thanh DĐ: 01655. 229. 869 Email: .. . |
|
Tp. Hồ Chí Minh » Q. 12 25/03/2016 |
|
xe nang nguoi cao 16 met, xe nang nguoi cao 15 met, xe nang nguoi cao 14 met (196) CÔNG TY TNHH PATIHA VIỆT NAM LÀ NHÀ NHẬP KHẨU PHÂN PHỐI CÁC LOẠI XE NÂNG HẠ ĐẠI LÝ ĐỘC QUYỀN DUY NHẤT CỦA HÃNG NOBLELIFT – GERMANY TẠI VIỆT NAM. .. . |
|
Tp. Hồ Chí Minh » Q. Bình Tân 25/03/2016 |
|
Tủ ấm (150lít) hãng LABTECH - Hàn Quốc giá rẻ (229) + TỦ ẤM ĐIỆN TỬ HIỆN SỐ Model: LIB-150M Hãng sản xuất: Daihan Labtech – Hàn Quốc Mọi chi tiết xin liên hệ: Võ Chí Thanh DĐ: 01655. 229. 869 Email: .. . |
|
Tp. Hồ Chí Minh » Q. 11 25/03/2016 |
|
Xe nâng OPK, xe nâng phuy, xe nâng chính chất lượng, giá tôt (179) Xe nâng phuy, xe nâng quay đổ phuy hiệu OPK, hàng chính hãng, giá tốt nhất Liên hệ: Lê Phương Linh 0936 017 988 Mail: sales@ epicvietnam. com Sky: .. . |
|
Tp. Hà Nội 25/03/2016 |
|
cân kỹ thuật , cân điện tử , cân kỹ thuật điện tử , kd - tbed (193) CÂN KỸ THUẬT ( CÂN ĐIỆN TỬ ) MODEL: KD - TBED Hãng sản xuất: KERDY-TAIWAN Các tính năng tổng quát: - Hãng sản xuất: KERDY-TAIWAN - Độ chính xác cao .. . |
|
Tp. Hồ Chí Minh 25/03/2016 |
|
Bán máy đầm cóc HONDA GX160 giá lẻ rẻ như giá buôn (192) ĐIỆN MÁY HOÀNG LONG Địa chỉ: 423 minh khai - hai bà trưng - hà nội HOTLINE: 0981114052 (Mr. Kiên) Điện máy Hoàng Long chuyên NHẬP KHẨU & PHÂN PHỐI .. . |
|
Tp. Hà Nội » Q. Hai Bà Trưng 25/03/2016 |
|
Thanh lý nhanh máy vặt lông gà, vịt phi 55 giá siêu rẻ (194) Công ty cổ phần điện máy Hoàng Long Địa chỉ bán máy vặt lông gà, lông vịt gía cực rẻ Hiện nay chúng tôi đang cần thanh lý nhanh máy vặt lông gà, vịt .. . |
|
Tp. Hà Nội » Q. Hai Bà Trưng 25/03/2016 |
|
bồn nhựa màu trắng 1000lit, thùng nhựa lồng thép 1 khối, tank nhựa 1000lit (226) TANK NHỰA 1000 LÍT LÀ MỘT SẢN PHẨM HỮU DỤNG TRONG VIỆC CHỨA HÓA CHẤT(HOẶC CÁC LOẠI CHẤT LỎNG KHÁC) ĐỒNG THỜI BÊN NGOÀI TANK NHỰA ĐƯỢCBAO BỌC BỞI MỘT .. . |
|
Hưng Yên 25/03/2016 |
|
|
Xem từ 31 đến 45 (của 30929 Rao vặt) |
|
|
| |
|
|
Đang xem » ERDCO Flow Meters and Indicators - 3100
|